EN
CN

Кабели для ветроэнергетики

supply Wind turbine cable wind turbine cables- Deru cable manufacturer

Спецификация

Basic structure Conductor+Insulation+Jacket
Conductor Plain Copper/ Tinned Copper
Insulation EPR
Braid Kevlar/ Plain Copper/ Tinned Copper
Jacket PUR/TPE/PCP


ВВЕДЕНИЕ

Deru Wind Energy Cable-Wind Turbine Generator Cable|Application Scope:


The rated voltage is 1.8/3kV and the twist-resistant flexible cable for wind power generation is suitable for power transmission and electrical control of grid-connected wind turbines. It is especially suitable for installation in special parts that need to withstand frequent twisting requirements between the nacelle and the tower. Mainly It is used for power transmission between the stator winding and rotor winding of the generator and the ground step-up transformer.


Deru Wind Energy Cable-Wind Turbine Cable|Product Structure


1. Conductor: Use soft copper conductive wire core;


2. Insulation: using ethylene propylene insulation


3. Sheath: using chloroprene/thermoplastic/polyurethane/chlorosulfonated polyethylene sheath


Deru Wind Energy Cable-Wind Turbine Cable|Product Specifications


Wind energy cable bending radius: not less than 6 times the cable outer diameter


Maximum operating temperature of wind energy cable conductor: 90℃


The rated voltages U0/U of wind energy cables are: 450/750V, 0.6/1kV, 1.8/3kV respectively


Maximum twist angle of wind energy cable: 180°/m


65d59b8b8ca43.png


ПРЕИМУЩЕСТВА

1. It has good low temperature resistance and wear resistance, as well as fatigue resistance, weather aging resistance, microbial resistance, and good corrosion resistance to oils and chemicals. Ordinary cables do not have wear resistance and corrosion resistance.


2. Excellent torsion resistance and bending performance: The finished cable can withstand four forward and reverse rotations each, and a torsion angle of 1080°, no less than 10 times in a low temperature environment of -25°C, -40°C or -55°C. The 10,000-time torsion resistance test requires that the conductor will not break and the sheath surface will not have cracks after the cable test. Ordinary cables are not suitable for twisting at low temperatures.


3. Applicable ambient temperature is -45℃~+110℃, operating temperature is -55℃~+110℃.


4. The laying temperature of cables should not be lower than -30℃.


5. Cable bending radius: not less than 4 times the outer diameter of the cable for fixed installation, and not less than 5 times the outer diameter of the cable for mobile installation. The bending radius of ordinary cables is 20 times the outer diameter of the cable.


ВОЗМОЖНОСТЬ ПЕРСОНАЛИЗАЦИИ

Whenever standards are not enough!

Whenever standards are not enough!

Considering different working conditions and equipment to be applied to, Derul's products are highly customized. The high customization of our cables can make sure that our products can best meet the demands in your practical application. We welcome you to send an inquiry with specific requirements to our professional sales, and we will provide a technical sheet with drawings of the cable and detailed specifications to you, and of course, a competitive quotation will be send to you soon after your confirmation on the technical sheet. This can lead to your successful and efficient purchasing.

 

You don't need to worry about the time cost of your customized purchasing. As the original manufacturer, we provide quick-response and "solution at once" services. Comparing to less-efficient communication about technical and quality issues with trading companies, we give our customers efficient feedback to every question raised from them, this is possible because of the close interconnection between our workshop, engineers and sales people.

Часто задаваемые вопросы

Q: Derul Cable является производителем или торговой компанией?

A: Derul Cable - это специальный производитель кабелей, базирующийся в Шанхае.

Q: Является ли цена договорной?

A: Да, цена договорная в зависимости от объема покупки.

Q: Каков стандартный минимальный заказ для кабеля?

A: Любое количество можно приобрести для товара на складе. Для продукции, которая должна быть изготовлена после заказа, минимальный объем заказа обычно составляет 100-200 м на тип.

Q: Как я могу получить образцы?

A: После оплаты потенциальной стоимости, включая экспресс-доставку и подтверждение размеров и структуры кабеля, мы организуем образец и отправим его прямо к вашей двери.

Q: Доступны ли услуги OEM или ODM?

A: Доступны услуги OEM и ODM. Вы можете предоставить нам свое требование, и мы оценим его, чтобы продвинуться вперед.

Q: Каково обычное время производства?

A: Для производства обычного количества обычно требуется около 15-25 дней.

Авторское право © Derul Cable (Shanghai) Co., Ltd. Все права защищены | Карта сайта | Политика конфиденциальности

WeChat